Properties
- Fast fit – True one piece component
- PA66 Nylon molded fitting
- Nylon threads supplied complete with glass reinforced nylon locknut
- Metallic threads made from Nickel Plated Brass
- Face seal details:
- Metric Nylon threads supplied with retained Polyester Elastomer Washer
- NPT supplied with retained Fiber Washer
- UNEF, Flange and Cable Glands supplied with O-ring
- Vibration and shock tested to EN61373 Cat 2
- Tamper resistant
- Both 90˚ and 45˚ elbows incorporate swept bore to facilitate cable installation and protect cables when installed
- Can be removed using a screwdriver
- All round teeth give high pull off strength 70kg with FPAH21
- Suitable for fine and coarse pitch conduits
- Temperature range: conduit fitting: -50˚C to +135˚C
- Low Fire Hazard (LFH)
- Halogen, sulphur and phosphorus free
- UV resistant
- Swivel threads allow assembly without twisting of cables
- EN 45545 HL3 and NFPA 130 compliant
Reducing Divider
Fast fit reducing divider.
| European (NW) sizes | Conduit In (mm) | Condui Out x 2 for divider | Part Number |
|---|---|---|---|
| 12 | 16 | 13 | FPA16-13-13 |
| 17 | 21 | 16 | FPA21-16-16 |
| 23 | 28 | 21 | FPA28-21-21 |
| 29 | 34 | 28 | FPA34-28-28 |
Reducing Divider
Fast fit reducing divider with additional seals for enhanced IP ratings
| European (NW) sizes | Conduit In (mm) | Condui Out x 2 for divider | Part Number |
|---|---|---|---|
| 12 | 16 | 13 | FPAX16-13-13 |
| 17 | 21 | 16 | FPAX21-16-16 |
| 23 | 28 | 21 | FPAX28-21-21 |
| 29 | 34 | 28 | FPAX34-28-28 |
| 36 | 42 | 34 | FPAX42-34-34 |
| 48 | 54 | 42 | FPAX54-42-42 |